Water is a relatively simple electroplating method

Water for electroplating process is relatively simple, from electroplating equipment to environment were not vacuum ion plating demanding, which is widely used. Generally applicable to ABS, ABS + PC material products. Is the main process would need to electroplating products in the chemical plating solution on plating. Because after plating product its remarkable increase of electrical conductivity, for some need insulation parts in need insulation parts coated with insulating oil, the part will not be to electroplating when plating, so as to achieve the insulation effect! Of course, the part of the insulating oil can become black, is not appropriate for the exterior surface. Or at the site of the need to electroplating sticking with special tape, protected and also to achieve the effect of insulation.

Water electroplating process can be divided into: defatted (except oil), coarsening, neutralizing reduction or soak, activation, glue, chemical plating, copper plating, nickel plating, chrome plating. Water plating adhesion is better than vacuum plating. Water plating color is drab, usually only a few bright silver and silver, etc, for flash silver, magic blue, cracks, water and so on a variety of seven color is powerless. And vacuum plating can solve the problem of seven color. Coating material of electroplating generally USES “hexavalent chromium”, it is environmental protection material.